Seismic isolation for designers and structural engineers / Trevor E. Kelly, Bill (W.H.) Robinson, R. Ivan Skinner.

Saved in:

Bibliographic Details
Published:	[Wellington, N.Z.] : Robinson Seismic Ltd. ; Holmes Consulting Group, [200-]
Main Author:	Kelly, Trevor E. (Trevor Edward)
Other Authors:	Skinner, R. Ivan (Robert Ivan) Robinson, William H. Skinner, R. Ivan (Robert Ivan). Introduction to seismic isolation
Subjects:	Earthquake resistant design. Seismic waves > Damping. Structural control (Engineering)
Format:	Book

Seismic isolation for designers and structural engineers /

Similar Items

An introduction to seismic isolation /
by: Skinner, R. Ivan (Robert Ivan)
Published: (1993)

Experimental studies of the ultimate behavior of seismically-isolated structures /
by: Clark, Peter W.
Published: (1997)

Retrofit of seismically isolated buildings for near field ground motion using additional damping /
by: Carden, Lyle Philip
Published: (2001)

The utility of ring springs in seismic isolation systems : a thesis submitted for the degree of Doctor of Philosophy in the Department of Mechanical Engineering, University of Canterbury, Christchurch, New Zealand /
by: Hill, K. E. (Kevin Eldon)
Published: (1995)

Seismic performance of semi-active control systems : a thesis submitted in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Civil Engineering at the University of Canterbury, Christchurch, New Zealand /
by: Franco Anaya, Roberto
Published: (2008)

Design, testing and simulation of grip ‘n’ grab ratcheting, tension-only devices for seismic energy dissipation systems : a thesis submitted for the degree of Doctor of Philosophy in Mechanical Engineering at the University of Canterbury, Christchurch, New Zealand /
by: Cook, Jarrod
Published: (2018)

Anti-seismic devices.
Published: (2018)

Principles of passive supplemental damping and seismic isolation /
by: Christopoulos, Constantin, 1974-
Published: (2006)

Seismic protection of structures using passive control system : a thesis submitted in partial fulfilment of the requirements for the degree of Doctor of Philosophy in the Department of Civil Engineering, University of Canterbury /
by: Bishay-Girges, Nagui William
Published: (2004)

Seismic isolation of bridge spans by pendulum suspension /
by: Veletzos, Marc John
Published: (1999)

Base isolation for multistorey building structures : a thesis submitted in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Civil Engineering in the University of Canterbury /
by: Charng, Peng-Hsiang
Published: (1998)

Modelling force behaviour and contributions of metallic extrusion dampers for seismic energy dissipation : a thesis presented for the degree of Doctor of Philosophy in Mechanical Engineering at the University of Canterbury, Christchurch, New Zealand /
by: Vishnupriya
Published: (2019)

Passive and semi-active tuned mass damper building systems : a thesis submitted in fulfilment of the requirements for the degree of Doctor of Philosophy of Civil and Natural Resources Engineering in the University of Canterbury /
by: Chey, Min Ho
Published: (2007)

Seismic qualification of passive mitigation devices /
Published: (2005)

Seismic, shock, and vibration isolation, 1989 : presented at the 1989 ASME Pressure Vessels and Piping Conference--JSME Co-Sponsorship, Honolulu, Hawaii, July 23-27, 1989 /
Published: (1989)

Response spectrum method in seismic analysis and design of structures /
by: Gupta, Ajaya K.,
Published: (1990)

Improved modelling and implementation guidance of energy dissipation devices : a thesis submitted for the degree of Doctor of Philosophy in Earthquake Engineering at the University of Canterbury, Christchurch, New Zealand /
by: Xie, Robin
Published: (2019)

Experimental investigations on semi-active and passive systems for seismic risk mitigation /
Published: (2001)

Viscous heating of fluid dampers during seismic and wind excitations : analytical solutions and design formulae /
Published: (1997)

The effect of mass irregularities on the response of inter-storey drift and floor accelerations for isolated and un-isolated structures : a thesis submitted in partial fulfilment of the requirements for the degree of Masters in Engineering in the University of Canterbury /
by: Waller, Alastair James
Published: (2010)

Next generation structural technologies : implementing high force-to-volume energy absorbers : a thesis presented for the degree of Doctor of Philosophy in Mechanical Engineering at the University of Canterbury, Christchurch, New Zealand /
by: Rodgers, Geoffrey W. (Geoffrey William)
Published: (2009)

The development of seismic detailing and design for more resilient bridge piers : submitted in [partial] fulfilment of the requirements for the degree of Doctor of Philosophy, Civil and Natural Resources Engineering, University of Canterbury /
by: McHaffie, Brandon
Published: (2020)

Base isolation of New Zealand light-frame wood buildings : Ph.D. thesis submitted in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Civil Engineering, Department of Civil and Natural Resources Engineering, University of Canterbury, Christchurch, New Zealand /
by: Francis, Tom
Published: (2022)

Design of seismic isolated structures : from theory to practice /
by: Naeim, Farzad
Published: (1999)

An evaluation of the effects of traveling seismic waves on the three-dimensional response of structures /
Published: (1977)

Building control with passive dampers : optimal performance-based design for earthquakes /
by: Takewaki, Izuru
Published: (2009)

Effect of damping mechanisms on the response of seismically isolated structures /
by: Makris, Nicos
Published: (1998)

Advanced statistical techniques for seismic hazard attenuation law estimation /
by: Askins, Richard Carl
Published: (1980)

Seismic isolation strategies for earthquake-resistant construction : emerging opportunities /
by: Melkumyan, Mikael
Published: (2019)

Response of structures to nonvertically incident seismic waves /
by: Luco, J. E.
Published: (1979)

Parametric control of structures using a tuned mass damper system under earthquake excitations : a thesis submitted in partial fulfilment of the requirements for the degree of Master of Engineering in Civil in the University of Canterbury /
by: Chey, Min Ho
Published: (2000)

Induced seismicity /
Published: (1992)

A study in earthquake engineering : in particular: considerations of the seismic response of layered ground : a thesis presented for the degree of Master of Engineering in Civil Engineering in the University of Canterbury, Christchurch, New Zealand /
by: Travers, John Hunter
Published: (1975)

Incorporating the influence of ground motion duration on structural deformation capacity in seismic design : a thesis submitted to the University of Canterbury in partial fulfillment of the requirements for the degree of Doctor of Philosophy, Department of Civil and Natural Resources Engineering, University of Canterbury, Christchurch, New Zealand /
by: Bhanu, Vishvendra
Published: (2022)

Seismic site and foundation performance soil damping /
by: Logan, T. C. (Timothy Cooper), 1953-
Published: (1996)

Wave motion in earthquake engineering /
Published: (2000)

Long-term behaviour of post-tensioned timber structures : a thesis submitted in fulfillment of the requirements for the degree of Doctor of Philosophy in Earthquake Engineering, Department of Civil Engineering and Natural Resources, University of Canterbury /
by: Granello, Gabriele

Seismic design of concrete structures /
Published: (1987)

Hysteretic behaviour of Asymmetric Friction Connections (AFCs) : a thesis submitted in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Civil Engineering in the [Department of Civil and Natural Resources Engineering], University of Canterbury, Christchurch – New Zealand /
by: Chanchi Golondrino, Jose Christian
Published: (2019)

A model code for the displacement-based seismic design of structures : DBD12 /
Published: (2012)